90682-2 datasheet(5/6 Pages) MACOM

No de pièce	90682-2

Description	PRO-CRIMPER* III Hand

Download	6 Pages

Scroll/Zoom	100%

Fabricant	MACOM [Tyco Electronics]

Site Internet	http://www.macom.com

Logo

5 / 6 page

408- 9933

PRO- CRIMPER III Hand Crimping Tool Assembly 90682- 1

5

of 6

Rev C

Tyco Electronics Corporation

8. MAINTENANCE

Ensure that the tool and dies are clean by wiping

them with a clean, soft cloth. Remove any debris with

a clean, soft brush. Do not use objects that could

damage the tool. When not in use, keep handles

closed to prevent objects from becoming lodged in

the crimping dies, and store in a clean, dry area.

9. VISUAL INSPECTION

The crimping dies should be inspected on a regular

basis to ensure that they have not become worn or

damaged. Inspect the crimp sections for flattened,

chipped, worn, or broken areas. If damage or

abnormal wear is evident, the tool must be replaced.

See Section 10, REPLACEMENT.

10. REPLACEMENT

Customer--replaceable parts are shown in Figure 1.

Available separately, PRO--CRIMPER III Hand

Crimping Tool Repair Kit 679221--1 includes a

replacement nut and a variety of pins, rings, screws,

and springs.

If the dies are damaged or worn excessively, they

must be replaced.

Order the repair kit and replaceable parts through

your Tyco Electronics representative, or call

1--800--526--5142, or send a facsimile of your

purchase order to 1--717--986--7605, or write to:

CUSTOMER SERVICE (38--35)

TYCO ELECTRONICS

PO BOX 3608

HARRISBURG PA 17105--3608

11.REVISION SUMMARY

Revisions to this instruction sheet include:

S

Changed PRO--CRIMPER II Hand Tool to

PRO--CRIMPER III Hand Tool;

S

Revised crimp--height comparator information;

S

Applied TE logo;

S

Updated format to current corporate

requirements; and

S

Added back page indicating tooling compatible

with dies 90682--2.

Numéro de pièce similaire - 90682-2

Fabricant	No de pièce	Fiches technique	Description
List of Unclassifed Man...	9068	252Kb / 1P	CHASSIS MOUNT SUPPORT
List of Unclassifed Man...	9068	100Kb / 2P	INSULATED PC SPACERS/SUPPORTS
Heyco.	9068	153Kb / 1P	Lockit™ Nylon Cable Clamps
	9068	152Kb / 2P	Snap Rivets
	9068	100Kb / 1P	Nytye® Push Rivets

More results

Description similaire - 90682-2

Fabricant	No de pièce	Fiches technique	Description
Tyco Electronics	408-9853	250Kb / 6P	PRO-CRIMPER* III Hand
	408-9917	214Kb / 4P	PRO-CRIMPER* III Hand
	408-9934	247Kb / 6P	PRO-CRIMPER* III Hand
	408-9855	254Kb / 6P	PRO-CRIMPER* III Hand
TE Connectivity Ltd	408-8917	839Kb / 5P	PRO-CRIMPER III Hand Crimping
TE Connectivity Ltd	408-4452	129Kb / 4P	PRO-CRIMPER III Hand Crimping
Tyco Electronics	408-4379	132Kb / 5P	PRO-CRIMPER* III Hand Crimping
TE Connectivity Ltd	408-9886	247Kb / 6P	PRO-CRIMPER III Hand Crimping
	408-4219	325Kb / 6P	PRO-CRIMPER III Hand Crimping
	408-4251	955Kb / 4P	PRO-CRIMPER III Hand Crimping

More results

90682-2 Fiches technique(PDF) 5 Page - Tyco Electronics

90682-2 Fiches technique(HTML) 5 Page - Tyco Electronics

Numéro de pièce similaire - 90682-2

Description similaire - 90682-2

Html Pages

1 2 3 4 5 6

Fiches technique Télécharger

Lien URL