90869-1 datasheet(5/6 Pages) TEC

No de pièce	90869-1

Description	PRO-CRIMPER III Hand Crimping Tool Assembly

Download	6 Pages

Scroll/Zoom	100%

Fabricant	TEC [TE Connectivity Ltd]

Site Internet	http://www.te.com/usa-en/home.html

Logo

5 / 6 page

408- 9964

5

of 6

Rev D

9. VISUAL INSPECTION

The crimping dies should be inspected on a regular

basis to ensure that they have not become worn or

damaged. Inspect the crimp sections for flattened,

chipped, worn, or broken areas. If damage or

abnormal wear is evident, the tool must be replaced.

See Section 10, REPLACEMENT.

10. REPLACEMENT

Customer--replaceable parts are shown in Figure 1.

Available separately, PRO--CRIMPER III Hand

Crimping Tool Repair Kit 679221--1 includes a

replacement nut and a variety of pins, rings, screws,

and springs.

If the dies are damaged or worn excessively, they

must be replaced.

Order the repair kit and replaceable parts through

your TE representative, or call 1--800--526--5142, or

send a facsimile of your purchase order to

1--717--986--7605, or write to:

CUSTOMER SERVICE (038--035)

TYCO ELECTRONICS CORPORATION

PO BOX 3608

HARRISBURG PA 17105--3608

11.REVISION SUMMARY

Revisions to this instruction sheet include:

S

Updated document to corporate requirements.

Numéro de pièce similaire - 90869-1

Fabricant	No de pièce	Fiches technique	Description
3M Electronics	9086	17Kb / 3P	High Performance Double Coated Tapes with Adhesive 375

Fabricant	No de pièce	Fiches technique	Description
TE Connectivity Ltd	408-9973	332Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly
Tyco Electronics	408-4274	245Kb / 6P	PRO-CRIMPER* III Hand Crimping Tool Assembly
TE Connectivity Ltd	408-9962	244Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly
Tyco Electronics	408-4353	246Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly
TE Connectivity Ltd	408-9967	411Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly
TE Connectivity Ltd	408-9992	261Kb / 6P	PRO-CRIMPER* III Hand Crimping Tool Assembly
Tyco Electronics	408-4275	244Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly
Tyco Electronics	408-4458	250Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly
TE Connectivity Ltd	408-9938	314Kb / 5P	PRO-CRIMPER III Hand Crimping Tool Assembly
TE Connectivity Ltd	408-9966	335Kb / 6P	PRO-CRIMPER III Hand Crimping Tool Assembly