Moteur de recherche de fiches techniques de composants électroniques |
|
CS10.481 Fiches technique(PDF) 10 Page - Red Lion Controls. Inc |
|
CS10.481 Fiches technique(HTML) 10 Page - Red Lion Controls. Inc |
10 / 20 page CS10.481 C–Series 48V, 5A, SINGLE PHASE INPUT Nov. 2006 / Rev.1.1 DS-CS10.481-EN All parameters are specified at 48V, 5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone +49 89 9278 0 Germany 10/20 EMC Emission EN 61000-6-4 Generic standards Conducted emission EN 55011, EN 55022, FCC Part 15, CISPR 11, CISPR 22 Class B, input lines EN 55022 Class A, output lines Radiated emission EN 55011, EN 55022 Class B Harmonic input current EN 61000-3-2 not fulfilled Voltage fluctuations, flicker EN 61000-3-3 fulfilled This device complies with FCC Part 15 rules. Operation is subjected to following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The power supply does not fulfill the harmonic current standard EN61000-3-2. Please note: A power supply has to comply with EN 61000-3-2 (Standard for harmonic input current) when: 1) the end-device is used within the European Union and 2) the end-device is connected to a public mains supply with a nominal voltage ≥ 220Vac and 3) the power supply is: - fitted in an end-device with an average input power in excess of 75W or - fitted in an end-device with a continuous input power in excess of 75W or - part of a lighting system. Exceptions: End-devices for professional applications with an input power > 1000W do not need to fulfill EN 61000-3-2. Comments: - The average input power must be determined in accordance with EN 61000-3-2. - Industrial mains supplies with their own transformer are considered to be “non-public”. - Where individual self-contained items of equipment are installed in a rack or case (e.g. devices connected in parallel), they are regarded as being individually connected to the mains supply. The rack or case need not be tested as a whole. Alternatively it is also permitted to assess the whole rack or case. This is recommended for devices used in professional applications with an input power greater than 1000W. |
Numéro de pièce similaire - CS10.481 |
|
Description similaire - CS10.481 |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |