STANDARD

MICROCIRCUIT DRAWING

SIZE

A

5962-89543

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

REVISION LEVEL

C

SHEET

10

DSCC FORM 2234

APR 97

TABLE IIA. Electrical test requirements.

Test requirements

Subgroups

(in accordance with

MIL-STD-883,

method 5005, table I)

Subgroups

(in accordance with

MIL-PRF-38535, table III)

Device

class M

Device

class Q

Device

class V

Interim electrical

parameters (see 4.2)

1

1

1

Final electrical

parameters (see 4.2)

1,2,3,4,5,6,8a 1/

1,2,3,4,5,6, 1/

8A

1,2,3,4,5,6 1/

8A

Group A test

requirements (see 4.4)

1,2,3,4,5,6,7,8A, 2/

9,10

1,2,3,4,5,6, 2/

7,8A,9,10

1,2,3,4,5,6, 2/

7,8A,9,10

Group C end-point electrical

parameters (see 4.4)

1,4

1,4

1,4 3/

Group D end-point electrical

parameters (see 4.4)

1,4

1,4

1,4

Group E end-point electrical

parameters (see 4.4)

1,4

1,4

1,4

2/ Subgroup 10, if not tested, shall be guaranteed to the limits specified in table I herein.

3/ Delta limits as specified in table IIB shall be required where specified, and delta limits shall be

computed with reference to the previous endpoint electrical parameters.

TABLE IIB. Delta limits at +25

°C.

Test

Device type

Delta limits

Min

Max

04

±0.5 mV

±45 pA

±20 pA

4.4 Conformance inspection. Technology conformance inspection for classes Q and V shall be in accordance with

MIL-PRF-38535 including groups A, B, C, D, and E inspections and as specified. Quality conformance inspection for device

class M shall be in accordance with MIL-PRF-38535, appendix A and as specified herein. Inspections to be performed for

device class M shall be those specified in method 5005 of MIL-STD-883 and herein for groups A, B, C, D, and E inspections

(see 4.4.1 through 4.4.4).

4.4.1 Group A inspection.

a.

Tests shall be as specified in table IIA herein.

b.

Subgroups 8B and 11 in table I, method 5005 of MIL-STD-883 shall be omitted.

4.4.2 Group C inspection. The group C inspection end-point electrical parameters shall be as specified in table IIA herein.