Moteur de recherche de fiches techniques de composants électroniques |
|
DS3486MX Fiches technique(PDF) 2 Page - Texas Instruments |
|
DS3486MX Fiches technique(HTML) 2 Page - Texas Instruments |
2 / 12 page DS3486 SNLS354D – MAY 1998 – REVISED APRIL 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) Power Supply Voltage, VCC 8V Input Common-Mode Voltage, VICM ±25V Input Differential Voltage, VID ±25V TRI-STATE Control Input Voltage, VI 8V Output Sink Current, IO 50 mA Storage Temperature, TSTG −65°C to +150°C Maximum Power Dissipation (3) at 25°C Molded PDIP Package 1362 mW SOIC Package 1002 mW SOIC Package Thermal Resistance θJA +124.5°C/W θJC +41.2°C/W (1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device operation. (2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications. (3) Derate PDIP molded package 10.2 mW/°C above 25°C. Derate SOIC package 8.01 mW/°C above 25°C. Operating Conditions Max Min Units Power Supply Voltage, VCC 4.75 5.25 V Operating Temperature, TA 0 70 °C Input Common-Mode Voltage −7.0 7.0 V Range, VICR Electrical Characteristics (1) (Unless otherwise noted, minimum and maximum limits apply over recommended temperature and power supply voltage ranges. Typical values are for TA = 25°C, VCC = 5V and VIC = 0V.) Symbol Parameter Conditions Min Typ Max Units VIH Input Voltage—High Logic State 2.0 V (TRI-STATE Control) VIL Input Voltage—Low Logic State 0.8 V (TRI-STATE Control) VTH(D) Differential Input Threshold Voltage −7V ≤ VIC ≤ 7V, VIH TRI-STATE = 2V 0.070 0.2 V IO = −0.4 mA, VOH ≥ 2.7V IO = 8 mA, VOL ≥ 0.5V 0.070 −0.2 V IIB (D) Input Bias Current VCC = 0V or 5.25V, Other Inputs at 0V VI = −10V −3.25 mA VI = −3V −1.50 mA VI = 3V 1.50 mA VI = 10V 3.25 mA Input Balance −7V ≤ VIC ≤ 7V, VIH(3C) = 2V, (2) VOH IO = −0.4 mA, VID = 0.4V 2.7 V VOL IO = 8 mA, VID = −0.4V 0.5 V (1) All currents into device pins are shown as positive, out of device pins are negative. All voltages referenced to ground unless otherwise noted. (2) Refer to EIA RS-422/3 for exact conditions. 2 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated Product Folder Links: DS3486 |
Numéro de pièce similaire - DS3486MX |
|
Description similaire - DS3486MX |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |