Moteur de recherche de fiches techniques de composants électroniques |
|
DAC5652AIPFB Fiches technique(PDF) 1 Page - Texas Instruments |
|
|
DAC5652AIPFB Fiches technique(HTML) 1 Page - Texas Instruments |
1 / 25 page DAC5652A www.ti.com SLAS535D – SEPTEMBER 2007 – REVISED AUGUST 2012 DUAL, 10-BIT 275 MSPS DIGITAL-TO-ANALOG CONVERTER Check for Samples: DAC5652A 1 FEATURES APPLICATIONS • 10-Bit Dual Transmit Digital-to-Analog • Cellular Base Transceiver Station Transmit Converter (DAC) Channel • 275 MSPS Update Rate – CDMA: W-CDMA, CDMA2000, IS-95 • Single Supply: 3.0 V to 3.6 V – TDMA: GSM, IS-136, EDGE/UWC-136 • High Spurious-Free Dynamic Range (SFDR): • Medical/Test Instrumentation 80 dBc at 5 MHz • Arbitrary Waveform Generators (ARB) • High Third-Order Two-Tone Intermodulation • Direct Digital Synthesis (DDS) (IMD3): 78 dBc at 15.1 MHz and 16.1 MHz • Cable Modem Termination System (CMTS) • Independent or Single Resistor Gain Control • Dual or Interleaved Data • On-Chip 1.2-V Reference • Low Power: 290 mW • Power-Down Mode: 9 mW • Package: 48-Pin Thin-Quad Flat Pack (TQFP) DESCRIPTION The DAC5652A is a monolithic, dual-channel, 10-bit, high-speed DAC with on-chip voltage reference. Operating with update rates of up to 275 MSPS, the DAC5652A offers exceptional dynamic performance, tight- gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication applications. Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential analog- output configurations. External resistors allow scaling of the full-scale output current for each DAC separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature-compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used. The DAC5652A has two, 10-bit, parallel input ports with separate clocks and data latches. For flexibility, the DAC5652A also supports multiplexed data for each DAC on one port when operating in the interleaved mode. The DAC5652A has been specifically designed for a differential transformer-coupled output with a 50- Ω doubly- terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output power of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported. The DAC5652A is available in a 48-pin TQFP package. Pin compatibility between family members provides 10- bit (DAC5652A), 12-bit (DAC5662), and 14-bit (DAC5672) resolution. Furthermore, the DAC5652A is pin compatible to the DAC2900 and AD9763 dual DACs. The device is characterized for operation over the industrial temperature range of –40°C to 85°C. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Copyright © 2007–2012, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. |
Numéro de pièce similaire - DAC5652AIPFB |
|
Description similaire - DAC5652AIPFB |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |