Moteur de recherche de fiches techniques de composants électroniques
  French  ▼

Delete All


Preview PDF Download HTML

BEAM200 Fiches technique(PDF) 1 Page - Systemsensor advanced ideas.

No de pièce BEAM200
Description  BEAM200 and BEAM200S Single-ended Reflected Type Beam Smoke Detectors
Download  2 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricant  SYSTEMSENSOR [Systemsensor advanced ideas.]
Site Internet
Logo SYSTEMSENSOR - Systemsensor advanced ideas.

BEAM200 Fiches technique(HTML) 1 Page - Systemsensor advanced ideas.

  BEAM200 Datasheet HTML 1Page - Systemsensor advanced ideas. BEAM200 Datasheet HTML 2Page - Systemsensor advanced ideas.  
Zoom Inzoom in Zoom Outzoom out
 1 / 2 page
background image
Agency Listings
BEAM200 and BEAM200S
Reflected Type
Beam Smoke Detectors
The BEAM200 and BEAM200S single-ended reflected
beam smoke detectors are uniquely suited for protecting
open areas with high ceilings where other methods of
smoke detection are difficult to install and maintain.
16 to 328 foot protection range
Single-ended, reflective design
Easiest alignment in the industry with digital display
6 field selectable sensitivity levels
Optional integral NFPA 72 sensitivity test feature
Removable plug-in terminal blocks
Built-in automatic gain control compensates for signal deterioration
from dust build-up
Remote test station available
Paintable cover
Optional heater kits available
The System Sensor BEAM200 and BEAM200S intelligent
reflected beam smoke detectors are designed to be used with
UL Listed compatible control panels only. Since all of the wiring is
connected to one side, the installation of the single-ended reflective
design is much easier than dual-ended projected beam detectors.
Alignment is accomplished quickly via an optical sight and a 2 digit
signal strength meter incorporated into the product. Listed for
operation from –22°F to 131°F, the BEAM200 detector can be used
in open area applications to provide early warning in environments
where temperature extremes exceed the capability of other types of
smoke detection.
The BEAM200 smoke detector includes one wired transmitter/
receiver unit and one reflector. When smoke enters the area between
the unit and the reflector it causes a reduction in the signal. The
alarm is activated when the smoke level reaches the predetermined
The BEAM200 device has four standard sensitivity selections along
with two Acclimatesettings. When either of the two Acclimate
settings are selected, the detector automatically adjusts its sensitivity
using advanced software algorithms to select the optimum
sensitivity for the specific environment.
The BEAM200S model is equipped with an added feature, an integral
sensitivity test feature that uses a test filter attached to a Servo motor
inside the detector optics. Using the remote test station RTS451, the
motor is activated and moves the filter in the pathway of the light
beam, thereby testing detector sensitivity. This integral sensitivity
test feature allows the user to quickly and easily meet the annual
maintenance and test requirements of NFPA 72.

Html Pages

1  2 

Fiches technique Télécharger

Go To PDF Page

Lien URL

Politique de confidentialité
ALLDATASHEET vous a-t-il été utile ?  [ DONATE ] 

À propos de Alldatasheet   |   Publicité   |   Contactez-nous   |   Politique de confidentialité   |   Echange de liens   |   Fabricants
All Rights Reserved©

Mirror Sites
English :  |   English :  |   Chinese :  |   German :  |   Japanese :
Russian :  |   Korean :  |   Spanish :  |   French :  |   Italian :
Portuguese :  |   Polish :  |   Vietnamese :