Moteur de recherche de fiches techniques de composants électroniques |
|
STDS75 Fiches technique(PDF) 9 Page - STMicroelectronics |
|
STDS75 Fiches technique(HTML) 9 Page - STMicroelectronics |
9 / 37 page STDS75 Description 9/37 1.3 Pin descriptions See Figure 1 on page 7 and Table 1 on page 7 for a brief overview of the signals connected to this device. 1.3.1 SDA (open drain) This is the serial data input/output pin for the 2-wire serial communication port. 1.3.2 SCL This is the serial clock input pin for the 2-wire serial communication port. 1.3.3 OS/INT (open drain) This is the over-limit signal/interrupt alert output pin. It is open drain, so it needs a pull-up resistor. Note: The open drain thermostat output that indicates if the temperature has exceeded user- programmable limits (over/under temperature indicator). 1.3.4 GND Ground; it is the reference for the power supply. It must be connected to system ground. 1.3.5 A2, A1, A0 A2, A1, and A0 are selectable address pins for the 3LSBs of the I2C interface address. They can be set to VDD or GND to provide 8 unique address selections. 1.3.6 VDD This is the supply voltage pin, and ranges from +2.7 V to +5.5 V. |
Numéro de pièce similaire - STDS75_08 |
|
Description similaire - STDS75_08 |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |