Moteur de recherche de fiches techniques de composants électroniques
  French  ▼

Delete All
ON OFF
ALLDATASHEET.FR

X  

Preview PDF Download HTML

PSRL0402M-I Fiches technique(PDF) 2 Page - Wall Industries,Inc.

No de pièce PSRL0402M-I
Description  400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
Download  4 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricant  WALL [Wall Industries,Inc.]
Site Internet  http://www.wallindustries.com
Logo WALL - Wall Industries,Inc.

PSRL0402M-I Fiches technique(HTML) 2 Page - Wall Industries,Inc.

  PSRL0402M-I Datasheet HTML 1Page - Wall Industries,Inc. PSRL0402M-I Datasheet HTML 2Page - Wall Industries,Inc. PSRL0402M-I Datasheet HTML 3Page - Wall Industries,Inc. PSRL0402M-I Datasheet HTML 4Page - Wall Industries,Inc.  
Zoom Inzoom in Zoom Outzoom out
 2 / 4 page
background image
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402M-
I Series
400 Watt with Airflow
Forced Current Sharing Series
Single Output Medical Approved
AC/DC Medical Power Supply with Active PFC
SPECIFICATIONS (CONTINUED)
GENERAL SPECIFICATIONS (CONTINUED)
Current Sharing
Designated as CSH on the CN3, optional single wired forced current sharing function and parallel up to 4
units within 10% accuracy at full load.
Current Monitor
Designated as CMN on the CN3 for current sense for a 0.5V to 3VDC to represent 0% to 100% output current.
Margin
Designated as MAG on the CN3 providing 50% of output voltage remote adjustment by applying 0.4 ~ 5V
signal on MAG.
AC Fail (optional)
Designated as ACF on the CN3 to monitor the input voltage, when input goes under 80 ±5VAC the signal will
go low (0) and then go high (+5V) once reappears over 86VAC.
LED Display
Bi-color green LED in front panel (E Type only). Any protection occurred or RSW applied low signal will emit
orange.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
Storage Temperature
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
Frequency 5 ~ 50Hz, acceleration ±7.35 m/(s x s) on X, Y, and Z axis.
Cooling
U Type (U-Chassis): 400W max with 23CFM airflow or 250W max under convection cooling.
E Type (Enclosed with side built-in fan): 400W
Fan Drive
12VDC/400mA is available to drive an external fan.
MTBF
100,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
Weight
U Type (U-Chassis): 1.3Kg
E Type (Enclosed with side built-in fan): 1.6Kg
Dimensions
U Type (U-Chassis): 8(L) x 5(W) x 1.6(H) inches.
E Type (Enclosed with side built-in fan): 9(L) x 5(W) x 1.6(H) inches.
Warranty
2 years
SAFETY
Emissions
FCC part15, CISPR 22 Class B, Conducted.
Safety Regulations
Approved to UL60950-1/ 60601-1, CSA C22.2 No. 60950-1-03/ 601.1-M90, TUV EN60950-1/ 60601-1,
CE Mark (LVD) EN61204-3/ 60601-1-2/ 61000-3-2,3, and IEC61000-4 Series Regulations and CB.
OUTPUT VOLTAGE / CURRENT RATING CHART
Output Current
Model
Output Voltage
Range
Preset
Voltage
Type U
(Convection)
Type U (with forced air)
& Type E
Regulation
Ripple &
Noise
PSRL0402Mx-03
I
2 – 3.3 VDC
3.3 VDC
45A
60A
+/- 1%
+/- 1%
PSRL0402Mx-05
I
5 – 6 VDC
5 VDC
45A
60A
+/- 1%
+/- 1%
PSRL0402Mx-12
I
12 – 15 VDC
12 VDC
20.84A
33.33
+/- 1%
+/- 1%
PSRL0402Mx-18
I
16 – 21 VDC
18 VDC
13.89A
22.22
+/- 1%
+/- 1%
PSRL0402Mx-24
I
22 – 30 VDC
24 VDC
10.42A
16.67
+/- 1%
+/- 1%
PSRL0402Mx-36
I
31 – 41 VDC
36 VDC
6.94A
11.11
+/- 1%
+/- 1%
PSRL0402Mx-48
I
42 – 58 VDC
48 VDC
5.21A
8.33
+/- 1%
+/- 1%
NOTES
1. PSRL0402M-I Series is designated as PSRL0402Mx-y where x can be blank (U-chassis), C (U-chassis with top cover), or
E (Enclosed with side built-in fan), y can be 03
I, 05I, 12I, 18I, 24I, 36I, or 48I for output voltage. “I” represents forced
current sharing (OR-ring diode).
2. PSRL0402MU-
I Series: 400W max. with 23CFM airflow or 250W max. under convection cooling; (Option: Top Cover)
3. PSRL0402ME-
I Series: 400W max. with built-in fan flow.
4. All output ranges are covered in agency certification and the preset voltage will be set as standard models. If any request
is not standard output, please contact us prior to ordering.
5. Providing peak power to 700W within 500uS for all models, longer duty duration need contact manufacture.
6. 1% minimum load is required to maintain the ripple and regulation.
7. Output is fully isolated.


Html Pages

1  2  3  4 


Fiches technique Télécharger

Go To PDF Page


Lien URL




Politique de confidentialité
ALLDATASHEET.FR
ALLDATASHEET vous a-t-il été utile ?  [ DONATE ] 

À propos de Alldatasheet   |   Publicité   |   Contactez-nous   |   Politique de confidentialité   |   Echange de liens   |   Fabricants
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn