TPA6013A4

SLOS635 – NOVEMBER 2009

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

AVAILABLE OPTIONS

PACKAGE

–40°C to 85°C

TPA6013A4PWP

(1)

The PWP package is available taped and reeled. To order a taped

and reeled part, add the suffix R to the part number

(e.g., TPA6013A4PWPR).

LEAD (PB-FREE) ORDERING INFORMATION

ORDERABLE DEVICE

TPA6013A4PWPG4

Active

Pb-Free

and Green

TPA6013A4PWPRG4

Active

(1)

The marketing status values are defined as follows:

(a) ACTIVE: This device recommended for new designs.

(b) LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

(c) NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using

this part in a new design.

(d) PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

(e) OBSOLETE: TI has discontinued production of the device.

(2)

Eco-Status Information – Additional details including specific material content can be accessed at www.ti.com/leadfree

(a) N/A: Not yet available Lead (Pb)-Free, for estimated conversion dates go to www.ti.com/leadfree.

(b) Pb-Free: TI defines "Lead (Pb)-Free" or "Pb-Free" to mean RoHS compatible, including a lead concentration that does not exceed

0.1% of total product weight, and, if designed to be soldered, suitable for use in specified lead-free soldering processes.

(c) Green: TI devices "Green" to mean Lead (Pb)-Free and in addition, uses package materials that do not contain halogens, including

bromine (Br), or antimony (Sb) above 0.1% of total product weight.

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range (unless otherwise noted)

(1)

UNIT

–0.3 V to 6 V

Input voltage

Continuous total power dissipation

See Dissipation Rating Table

Operating free-air temperature range

–40°C to 85°C

Operating junction temperature range

–40°C to 150°C

Storage temperature range

–65°C to 150°C

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

DISSIPATION RATING TABLE

DERATING FACTOR

PACKAGE

POWER RATING

POWER RATING

POWER RATING

PWP

2.7 mW

21.8 mW/°C

1.7 W

1.4 W

2

Submit Documentation Feedback

Copyright © 2009, Texas Instruments Incorporated

Product Folder Link(s) :TPA6013A4