Moteur de recherche de fiches techniques de composants électroniques |
|
LMZ20502SILT Fiches technique(PDF) 4 Page - Texas Instruments |
|
|
LMZ20502SILT Fiches technique(HTML) 4 Page - Texas Instruments |
4 / 37 page LMZ20502 SNVS852C – JUNE 2012 – REVISED APRIL 2015 www.ti.com 7 Specifications 7.1 Absolute Maximum Ratings Under the recommended operating junction temperature range of -40°C to 125°C (unless otherwise noted) (1) MIN MAX UNIT VIN to GND –0.2 6 EN, MODE, FB, PG, to GND(2) –0.2 VIN+0.2 V VOUT to GND(2) –0.2 VIN+0.2 Junction temperature 150 °C Peak soldering reflow temperature for Pb(3) 240 °C Peak soldering reflow temperature for No-Pb(3) 260 Storage temperature range –65 150 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The absolute maximum voltage on this pin must not exceed 6V with respect to ground. Do not allow the voltage on the output pin to exceed the voltage on the input pin by more than 0.2 V. (3) For soldering information, please refer to the following document: SNOA401. 7.2 ESD Ratings VALUE UNIT Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins(1) ±2000 V(ESD) Electrostatic discharge V Charged-device model (CDM), per JEDEC specification JESD22-C101, ±500 all pins(2) (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 7.3 Recommended Operating Conditions Under the recommended operating junction temperature range of -40°C to 125°C (unless otherwise noted) (1) MIN NOM MAX UNIT Input voltage 2.7 5.5 V Output voltage programming 0.8 3.6 V Output voltage range (2) 0 3.6 V Load current 0 2 A Power good flag current 0 4 mA Junction temperature -40 125 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) Under no conditions should the output voltage be allowed to fall below zero volts. 4 Submit Documentation Feedback Copyright © 2012–2015, Texas Instruments Incorporated Product Folder Links: LMZ20502 |
Numéro de pièce similaire - LMZ20502SILT |
|
Description similaire - LMZ20502SILT |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |