Moteur de recherche de fiches techniques de composants électroniques |
|
TPA3116D2-Q1 Fiches technique(PDF) 5 Page - Texas Instruments |
|
|
TPA3116D2-Q1 Fiches technique(HTML) 5 Page - Texas Instruments |
5 / 36 page TPA3116D2-Q1, TPA3118D2-Q1 www.ti.com SLOS862A – JULY 2015 – REVISED AUGUST 2015 6 Specifications 6.1 Absolute Maximum Ratings over operating ambient temperature range (unless otherwise noted) (1) VALUE UNIT Supply voltage, VCC PVCC, AVCC –0.3 to 30 V INPL, INNL, INPR, INNR –0.3 to 6.3 V Input voltage, VI PLIMIT, GAIN/SLV, SYNC –0.3 to GVDD + 0.3 V AM0, AM1, AM2, MUTE, SD, MODSEL –0.3 to PVCC + 0.3 V Slew rate, maximum(2) AM0, AM1, AM2, MUTE, SD, MODSEL 10 V/ms Operating ambient temperature, TA –40 to 125 °C Operating junction temperature range, TJ –40 to 150 °C Storage temperature range, Tstg –40 to 125 °C (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) 100-k Ω series resistor is needed if maximum slew rate is exceeded. 6.2 ESD Ratings VALUE UNIT Human-body model (HBM), per AEC Q100-002(1) ±2000 All pins ±450 V(ESD) Electrostatic discharge V Charged-device model (CDM), per AEC Corner pins (1, 16, 17, Q100-011 ±450 and 32) (1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification. 6.3 Recommended Operating Conditions over operating ambient temperature range (unless otherwise noted) MIN NOM MAX UNIT VCC Supply voltage PVCC, AVCC 4.5 26 V High-level input VIH AM0, AM1, AM2, MUTE, SD, SYNC, MODSEL 2 V voltage Low-level input VIL AM0, AM1, AM2, MUTE, SD, SYNC, MODSEL 0.8 V voltage Low-level output VOL FAULT, RPULLUP = 100 kΩ, V(PVCC) = 26 V 0.8 V voltage High-level input IIH AM0, AM1, AM2, MUTE, SD, MODSEL (VI = 2 V, VCC = 18 V) 50 µA current Output filter: L = 10 µH, C = 680 nF, BTL 3.2 4 Minimum load RL Ω impedance Output filter: L = 10 µH, C = 1 µF, PBTL 1.6 Output-filter Lo Minimum output filter inductance under short-circuit condition 1 µH inductance Copyright © 2015, Texas Instruments Incorporated Submit Documentation Feedback 5 Product Folder Links: TPA3116D2-Q1 TPA3118D2-Q1 |
Numéro de pièce similaire - TPA3116D2-Q1 |
|
Description similaire - TPA3116D2-Q1 |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |