tures

Figure 3 depicts the relationship between pulse

variation versus ambient temperature

TLF6538 – 4

FIGURE 3

TLF6538 – 5

FIGURE 4

6 The ‘‘K’’ coefficient is not a constant but varies as a

characteristic

TLF6538 – 6

FIGURE 5

as close to the one-shot device pins as possible to mini-

mize stray capacitance to reduce noise pick-up and to

and (11) is greater than 3 cm for example the output

pulse width might be quite different from values predicted

from the appropriate equations A non-inductive and low

capacitive path is necessary to ensure complete dis-

output pulse width will be accurate

quency standards and practices so that switching tran-

interaction between one-shots A 001 mF to 010 mF by-

to ground is necessary on each device Furthermore the

pin as space permits

For further detailed device characteristics and output performance please

refer to the NSC one-shot application note AN-366

4