○Product structure：Silicon monolithic integrated circuit ○This product is not designed with protection against radioactive rays.

1/19

Datasheet

TSZ02201-0R6R0A600440-1-2

© 2012 ROHM Co., Ltd. All rights reserved.

www.rohm.com

TSZ22111･14･001

21.Dec.2012 Rev.002

500mA Variable / Fixed Output

LDO Regulators

BDxxIA5WEFJ

●General Description

BDxxIA5WEFJ series devices are LDO regulators with an output current of 0.5A. The output accuracy is ±1% of the output

voltage. Both fixed and variable output voltage devices are available. The output voltage of the variable output voltage

device can be varied from 0.8 to 4.5V using external resistors. Various fixed output voltage devices that do not use external

resistors are also available. It can be used for a wide range of digital appliance applications. It has a small package type:

HTSOP-J8 (4.90mm x 6.00mm x 1.00mm). These devices have built in over current protection to protect the device when

output is shorted, 0µA shutdown mode and thermal shutdown circuit to protect the device during over load conditions.

These LDO regulators are usable with ceramic capacitors that enable a smaller layout and longer life.

●Features

■ +/-1% output voltage accuracy

■ Built-in Over Current Protection circuit (OCP)

■ Built-in Thermal Shut Down circuit (TSD)

■ Zero µA Shutdown mode

●Key Specifications

Input Power Supply Voltage range:

2.4V to 5.5V

Output voltage range(Variable type):

0.8V to 4.5V

Output voltage(Fixed type):

1.0V/1.2V/1.5V/1.8V/2.5V/3.0V/3.3V

Output current:

0.5A (Max.)

Shutdown current:

0

μA (Typ.)

Operating temperature range:

-25℃ to +85℃

●Typical Application Circuit

●Package

(Typ.)

(Typ.)

(Max.)

HTSOP-J8

4.90mm x 6.00mm x 1.00mm

HTSOP-J8

EN

GND

FIN

FB

EN

GND

FIN

Output voltage variable type

Output voltage fixed type