Moteur de recherche de fiches techniques de composants électroniques |
|
ADP1051 Fiches technique(PDF) 10 Page - Analog Devices |
|
ADP1051 Fiches technique(HTML) 10 Page - Analog Devices |
10 / 17 page ADP1051 Preliminary Technical Data Rev. PrA | Page 10 of 17 Pin No. Mnemonic Description 20 AGND IC Common Analog GND. The internal analog circuitry ground and digital circuitry ground is star connected to this pin through bonding wires. 21 RES Resistor Input. This pin sets up the internal reference for internal PLL Frequency. Connect a 10 kΩ resistor (±0.1%) from RES to AGND. This signal is referred to AGND. 22 ADD Address Select Input to program I2C/PMBus address. Connect a resistor from ADD to AGND. This signal is referred to AGND. 23 RTD Thermistor Input. Place a thermistor 100 kΩ 1% beta = 4250 1% in parallel with a 16.5 kΩ (1%) resistor. This pin is referenced to AGND. Connect to AGND if not used. 24 OVP Over Voltage Protection. This signal is used as redundant OVP protection. This signal is referred to VS-. EP Exposed Pad. The ADP1051 has an exposed thermal pad on the underside of the package. For increased reliability of the solder joints and maximum thermal capability, it is recommended that the pad be soldered to the PCB AGND plane. |
Numéro de pièce similaire - ADP1051 |
|
Description similaire - ADP1051 |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |