Moteur de recherche de fiches techniques de composants électroniques |
|
CA310 Fiches technique(PDF) 1 Page - Extech Instruments Corporation. |
|
CA310 Fiches technique(HTML) 1 Page - Extech Instruments Corporation. |
1 / 2 page 300 AMP AC CLAMP ADAPTOR OUTPUT VOLTAGE: 1mV AC Per 1A AC CATII 600V CA300 User’s Guide Model CA310 300A AC Current Clamp-on MultiMeter Adaptor Introduction Congratulations on your purchase of the Extech CA310 300 Amp AC Clamp-On MultiMeter Adaptor. With this clamp adaptor an AC current can be safely measured by simply clamping around a single conductor. The adaptor outputs an AC mV signal that is proportional to the measured AC current. The DMM mV reading (times 10) is equivalent to the value of the AC current. Careful use of this device will provide years of reliable service. Specifications Sensor type Induction coil Measurement Range 0.1 to 300 Amps AC Adaptor Output 10mV AC output to DMM per 1A AC measurement Frequency range 50/60Hz Working voltage 600V CAT II (IEC 1010-1) Maximum output impedance 45 Ω Accuracy ± (3.0% + 10mV) for readings less than 50A ± (2.0% + 5mV) for readings greater than 50A Temperature coefficient 0.2 times the specified accuracy per oC < 18oC or > 28oC Jaw size 1.2" (30mm) Operating Conditions 32 to 122 oF (0 to 50oC) < 80% RH Dimensions/Weight 3.2 x 6.1 x 1.4" (80 x 156 x 35mm); 7.8 oz. (220g) NOTE: Accuracy is specified for a period of one year for ambient conditions 64 oF to 84oF (18 oC to 28oC) < 80% RH. Safety Safety Symbols This symbol, adjacent to another symbol or terminal, indicates the user must refer to the manual for further information. This symbol indicates that double insulation is used. WARNING: This indicates that a potentially hazardous condition which, if not avoided, could result in death or serious injury. Safety Precautions 1. WARNING: Improper use of this meter can cause damage, shock, injury or death. Read and understand this manual before operating the meter. 2. Inspect the condition of the test leads and the meter itself for any damage before operating the meter. Repair or replace any damage before use. 3. Do not use on non-insulated conductors at voltages greater than 250VAC rms or DC. |
Numéro de pièce similaire - CA310 |
|
Description similaire - CA310 |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |