Moteur de recherche de fiches techniques de composants électroniques |
|
HCPL-5150-300 Fiches technique(PDF) 7 Page - Agilent(Hewlett-Packard) |
|
HCPL-5150-300 Fiches technique(HTML) 7 Page - Agilent(Hewlett-Packard) |
7 / 16 page 7 Package Characteristics Over recommended operating conditions (TA = -55 to +125°C) unless otherwise specified. Notes: 1. Maximum pulse width = 10 µs, maximum duty cycle = 0.2%. This value is intended to allow for component tolerances for designs with I O peak minimum = 0.5 A. See Applications section for additional details on limiting IOH peak. 2. Maximum pulse width = 50 µs, maximum duty cycle = 0.5%. 3. In this test VOH is measured with a dc load current. When driving capacitive loads VOH will approach VCC as IOH approaches zero amps. 4. Maximum pulse width = 1 ms, maximum duty cycle = 20%. 5. This is a momentary withstand test, not an operating condition. 6. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted together. 7. The difference between tPHL and tPLH between any two HCPL-5150 parts under the same test condition. 8. Pins 1 and 4 need to be connected to LED common. 9. Common mode transient immunity in the high state is the maximum tolerable |dVCM/dt| of the common mode pulse, VCM, to assure that the output will remain in the high state (i.e., VO > 15.0 V). 10. Common mode transient immunity in a low state is the maximum tolerable |dVCM/dt| of the common mode pulse, VCM, to assure that the output will remain in a low state (i.e., VO < 1.0 V). 11. This load condition approximates the gate load of a 1200 V/25 A IGBT. 12. Pulse Width Distortion (PWD) is defined as |tPHL-tPLH| for any given device. 13. Standard parts receive 100% testing at 25 °C (Subgroups 1 and 9). SMD and Class H parts receive 100% testing at 25, 125 and -55°C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively). 14. Parameters are tested as part of device initial characterization and after design and process changes. Parameters are guaranteed to limits specified for all lots not specifically tested. Parameter Symbol Test Conditions Group A Subgroups (13) Limits Units Fig. Note Min. Typ.* Max. Input-Output Leakage Current II-O VI-O = 1500Vdc RH = 45%, t = 5 sec., TA = 25°C 1 1.0 µA 5, 6 Resistance (Input-Output) RI-O VI-O = 500 VDC 1010 Ω 6 Capacitance (Input-Output) CI-O f = 1 MHz 2.34 pF 6 *All typicals at TA = 25°C. |
Numéro de pièce similaire - HCPL-5150-300 |
|
Description similaire - HCPL-5150-300 |
|
|
Lien URL |
Politique de confidentialité |
ALLDATASHEET.FR |
ALLDATASHEET vous a-t-il été utile ? [ DONATE ] |
À propos de Alldatasheet | Publicité | Contactez-nous | Politique de confidentialité | Echange de liens | Fabricants All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |